Product Selector | MasterBond.com

Product	Certifications	Applications	Viscosity	Cure Schedule	Hardness	Temp. Range	Link to Content
Supreme 11HT-LO Toughened, two epoxy for bonding, sealing and coating meets NASA low outgassing Tensile Lap Shear Strength 3,200-3,400 psi Tensile Modulus 300,000-350,000 psi	1,000 Hours at 85°C/85% RH NASA Low Outgassing RoHS Compliant	Bonding Coating Gap Filling Sealing	Part A: 90,000-120,000 cps, Part B: 60,000-110,000 cps	75°F: 24-36 hours; 200°F: 1-2 hours	75-85 Shore D	-112°F to +400°F	/fr/tds/supreme-11ht-lo
Supreme 3HT-80 One component, toughened epoxy adhesive, sealant and coating Dielectric Constant 3.8 Tensile Lap Shear Strength 600-800 psi	1,000 Hours at 85°C/85% RH RoHS Compliant	Bonding Coating Gap Filling Sealing	70,000-150,000 cps	175-180°F 45-50 minutes, 250°F 20-30 minutes	75-85 Shore D	-100°F to +350°F	/fr/tds/supreme-3ht-80
UV10TKMed One component UV curable, biocompatible, high viscosity compound Glass Transition Temperature (Tg) 135-140°C Refractive Index 1.55	1,000 Hours at 85°C/85% RH ISO 10993-5 for Cytotoxicity RoHS Compliant USP Class VI Medical	Bonding Coating Encapsulation Sealing	35,000-45,000 cps	cures readily in 20-30 seconds when exposed to a UV light source emitting at a wavelength of 320-365 nm with an energy output as low as 20-40 milliwatts per cm²	75-85 Shore D	-60°F to +450°F	/fr/tds/uv10tkmed
UV15DC80-1Med One component, moderate viscosity, UV and heat curable epoxy compound that meets ISO 10993-5 for medical device applications Dielectric Constant 3.49 Refractive Index 1.52	ISO 10993-5 for Cytotoxicity RoHS Compliant	Bonding Coating Encapsulation Gap Filling Sealing	20,000-40,000 cps	Cure at 80°C for 40-60 minutes; Additional post curing at 80°C for 2-4 hours or 125°C for 30-60 minutes	>70 Shore D	-80°F to +350°F	/fr/tds/uv15dc80-1med
UV15RCL Red colored UV curable epoxy system turns clear upon exposure to UV light Glass Transition Temperature (Tg) 90-95°C without post cure, 125-130°C with post cure Refractive Index 1.517	1,000 Hours at 85°C/85% RH RoHS Compliant	Bonding Coating Gap Filling Sealing	115-350 cps	UV light 320-365 nm for 30-60 seconds	>75 Shore D	-80°F to +350°F	/fr/tds/uv15rcl
UV22DC80-1 One component, nanosilica filled, dual cure system with UV and heat curing mechanisms Coefficient of Thermal Expansion 30-35 x 10⁻⁶ in/in/°C Refractive Index 1.52	NASA Low Outgassing RoHS Compliant	Bonding Coating Encapsulation Gap Filling Potting Sealing Underfill	500-3,500 cps	Dual cure UV and heat at 80°C, Cures at 80°C in shadowed out areas, Areas not cured because of shadowing can be cured at 80°C for 40-60 minutes, Post curing at 125-150°C for 15-30 minutes can increase the glass transition temperature (Tg) from 90°C achieved by straight UV curing to over 125°C	80-90 Shore D	-100°F to +350°F	/fr/tds/uv22dc80-1
UV24TKLO One component, moderate viscosity, UV curable system meets NASA low outgassing Dielectric Constant 3.7 Glass Transition Temperature (Tg) 120-130°C	NASA Low Outgassing RoHS Compliant	Bonding Coating Encapsulation Gap Filling Sealing	40,000-55,000 cps	UV light 320-365 nm for 20-30 seconds	80-85 Shore D	-60°F to +400°F	/fr/tds/uv24tklo
EP101HTX-3 One component epoxy system for impregnation, bonding, sealing and coating Glass Transition Temperature (Tg) 170-175°C Volume Resistivity >3 x 10¹⁴ ohm-cm	RoHS Compliant	Bonding Sealing Coating Impregnation	300-1,000 cps	6 to 8 hours at 300°F followed by 2 to 3 hours at 350°F	80-90 Shore D	-60°F to +500°F	/fr/tds/ep101htx-3
EP110F8-1 Two component, high performance epoxy for potting, sealing, encapsulating and casting Dielectric Constant 2.81 Elongation 85-95%	RoHS Compliant	Potting Sealing Encapsulation Casting Bonding Coating Gap Filling	2,500-5,000 cps	4-6 hours at 250-300°F	65-75 Shore D	-80°F to +325°F	/fr/tds/ep110f8-1
EP110F8-3 Two component, high performance epoxy for potting, sealing, encapsulating and casting Elongation 120-150% Volume Resistivity >10¹⁵ ohm-cm	RoHS Compliant	Sealing Casting Encapsulation Potting Coating Bonding Gap Filling	1,000-2,000 cps	4-6 hours at 250-300°F	40-50 Shore A	-100°F to +300°F	/fr/tds/ep110f8-3

Need Expert Guidance?

Our expert engineers offer one-on-one consultations to help you navigate our extensive material library and find the right solution for your application. We ensure confidentiality and quick turnaround (1-2 business days).

Discuss Your Application