Master Bond UV15DC80Med is a special dual cure epoxy based system that offers a primary cure using UV light along with a secondary heat curing mechanism. This extraordinary compound also meets USP Class VI specifications and passes ISO 10993-5 testing. UV15DC80Med allows for curing areas on parts that do not allow UV light curing because of “shadowing” issues. It is important to note that the heat curing portion of this system can be initiated at the relatively lower temperature of 80°C.
Syringe
Packaging Icon
Master Bond UV15DC80LV-FHC is a special dual cure epoxy based system which offers a primary cure utilizing UV light along with a secondary heat curing mechanism. This system addresses the problem of curing areas on parts that do not allow UV light curing because of “shadowing” issues. Most noteworthy is that the heat cure portion can be initiated at only 80°C rather than at the more common 125°C. Another very useful feature of a dual cure UV is that it allows for rapid fixturing and then enables the cure to be completed by adding heat.
Master Bond UV15DC80LV is a special dual cure epoxy based system which offers a primary cure utilizing UV light along with a secondary heat curing mechanism. This system addresses the problem of curing areas on parts that do not allow UV light curing because of “shadowing” issues. Most noteworthy is that the heat cure portion can be initiated at only 80°C rather than at the more common 125°C. Another very useful feature of a dual cure UV is that it allows for rapid fixturing and then enables the cure to be completed by adding heat.
Master Bond EP3SP5FL-ND2 is a special epoxy adhesive that requires no mixing, offers an unsurpassed curing speed of 1-2 minutes at 300°F and a very good performance profile. It is a paste viscosity with minimal flow upon curing that is easy to apply. Since it requires curing at 300°F, it essentially has unlimited working life at room temperature. It will bond well to a variety of substrates including metals, composites, glass, ceramics, many rubbers and plastics.
Master Bond Supreme 10HTF-1 combines very fast curing and simple handling properties with a superior performance profile. It has a smooth paste consistency and is easy to apply. Supreme 10HTF-1 is a true one part system; it is not premixed and frozen and has an unlimited working life at room temperature. It is rapid curing: 5-10 minutes at 300°F or 15-20 minutes at 250°F. It should be noted that post curing at 250-300°F for 1-2 hours will help optimize the properties.