Master Bond LED422DC90 is a one component, nanosilica filled dual cure adhesive system engineered for high-speed fixturing and bonding of opaque substrates. This unique "side-bonding" capability allows for rapid polymerization up to 3-4 mm in depth by exposing the adhesive to 405 nm LED light from an angle. The cure is then completed by a secondary heat cure at 90-95°C for 30-45 minutes. This two-tiered curing process allows for the precise and rapid fixturing of heat-sensitive components.
Ideal for potting and encapsulation applications, MasterSil 157 is a two component silicone system that features low viscosity and low exotherm. It has superior electrical insulation properties and can cure in sections beyond 1 inch thick.
Master Bond EP30LP-2 is a two component epoxy with a low viscosity and a volume resistivity of over 1014 ohm-cm, making it well suited for potting and encapsulation applications. This high performance system can also be used for bonding and sealing.
Meter Mix Dispense Systems Shorten Cycle Times
Automatic meter mix dispensing equipment can reduce production costs and enhance quality/reliability in bonding, sealing, coating, potting/encapsulation applications. Two component filled/unfilled compounds such as epoxies, silicones, polyurethanes, polysulfides can be consistently, accurately applied on complex shapes with little wastage. From filling to spraying to dispensing dots, lines, beads this machinery can improve throughput/yields to give manufacturers a competitive edge.
Master Bond MasterSil 910Med is a one part acetoxy type silicone system that meets USP Class VI specifications for biocompatibility and ISO 10993-5 testing for cytotoxicity. This translucent paste also withstands many sterilization methods, including liquid sterilants, gamma radiation and EtO.
Durable, corrosion inhibiting structural adhesive formulations are designed for panel assembly applications. These products provide uniform distribution of stress, prevent heat distortion from welding and increase production speeds. Adhesion to a wide range of surfaces including steel, aluminum, glass fiber reinforced plastic and flame treated polyethylene is excellent. Noise and vibration is reduced with systems that exhibit high elasticity. To maximize product performance surface preparation is essential and the use of a primer may be required for optimum.
Gap filling, seam sealing compounds provide protection against corrosion, good adhesion and prevent air/water leakage. These products are designed for metal, glass reinforced plastic, polycarbonate, polyurethane and other surfaces. They are frequently employed for internal/external seams between panels. Elastic formulations absorb vibration, shock and impact. Rigid curing systems are recommended for specific applications and offer higher bond strength properties.
Master Bond offers many cost effective options for nameplate attachment. Key considerations are size, shape, thickness and type of substrates being bonded. Also of prime importance is the service conditions in which attached nameplate will be exposed to. This includes outdoor exposures, temperature cycling, abrasion, moisture/chemical contact.
Featured Video
LED405Med: How do you use an LED curing adhesive?
LED curable adhesive systems offer safe and rapid cures upon exposure to an LED light source. Learn how to properly apply and cure an LED curable adhesive system using a portable LED light source in this demonstration video.